Home > Hard Drive > Please Help I Cant Install The Second Sata Hard Drive

Please Help I Cant Install The Second Sata Hard Drive


When you have multiple drives installed, it’s important to check that the Bios knows which drive from which to boot. I would like to use this computer to recover my data from a Samsung Spin Point (IDE) SV0813H, Hard Disk (XP) and a Seagate U Series 5 (IDE)ST340823A (ME) Hard Disk. next 8. (when finished) > finish *** now your hdd will show up in windows explorer (or my computer) because NOW ONLY it (JUST) became usable! Reply Germ says: August 16, 2007 at 1:07 pm I inherited my works old server computer and I want to convert it to a stand alone personal PC. navigate to this website

Report ANX- Oct 7, 2012 at 09:59 PM One more thanks Helpful +40 Report Dinesh Feb 17, 2009 at 09:31 AM dear friend type diskmgmt.msc in your run command...ull find 80gb First you partition - do a primary partition if you want only one partition on the hard drive. This was more than enough to help even the Lowest level of expearance Swap or add a hard drive!!! andyscreationsJun 14, 2014, 8:14 PM I had the same problem and found the SOLUTION.... http://ccm.net/forum/affich-32218-2nd-sata-hard-drive-not-shown-on-my-computer

How To Install A Second Hard Drive Windows 10

the Global Study Desk nadun flower Reply Priyankar November 22, 2016 at 4:07 am I did the same procedure, what you have written but can't find the 2hdd option in" my Your +12V is normally split between what called rails, And the +12V rail you are using is just not enough for the 2 HDDs and what ever else is on the Related Posts:What to consider when buying a new hard driveThree ways to keep your hard drive healthy and prolong its…LaCie 4TB Porsche Design USB 3.0 External Hard Drive ReviewHow To Install

Step 5: Partition and format your hard drive Access Windows XP's Disk Management function from the Administrative Tools window in Control Panel. Please reply, greatly appreciate your time. Reply James Scholes says: June 23, 2009 at 2:47 pm Hi, I have a drive mounted in an external enclosure, on which the power supply has gone dead. How To Install A Second Sata Hard Drive Reply James Bruce January 21, 2011 at 10:16 pm You're right.

Sign up now. How To Install A Second Hard Drive Windows 7 I installed just as you said. If not, you can also buy an SATA or ATX power splitter, turning one of your existing cables into two. http://www.tomshardware.com/answers/id-1664309/boot-installing-sata-hard-disk.html The misleading factor was that, to my best recollection, the problems did not start right after installing the new card.

However, I waited for a few hours and came back, and it seems to have done the trick. How To Configure A Second Hard Drive Just the right amount of geekiness in my opinion for what it's worth! Type diskmgmt.msc and enter 3. Now it's formatting like a charm and I can see it in explorer.

How To Install A Second Hard Drive Windows 7

Thank You!! http://www.computershopper.com/storage/howto/install-a-new-hard-drive-in-five-easy-steps Reply Kramium says: June 28, 2008 at 10:14 pm G'day David Risley, Great help from your website! How To Install A Second Hard Drive Windows 10 Report hisnez- Jan 10, 2010 at 12:07 AM thank you very much.i almost took the hardrive back to the store. New Hard Drive Not Showing Up Windows 10 I saw this on PC Advisor and thought you should see it too.

We prefer having the DVD drive as the last drive letter. useful reference Your new hard disk should be listed in the centre pane. the drive is working properly. If you run into any trouble following this guide or installing your hard drive, feel free to join our forums at http://forum.pcmech.com and ask for help, someone will be glad to Second Hard Drive Not Showing

Report jeevan- Jun 14, 2010 at 12:23 PM thanks a lot...! However, when I read the Microsoft website, it said that SP 3 should not be installed until SP 1.a (I believe this was correct) or SP 2 are installed. Just because a computer is old doesn't mean you have to junk it if all you need is more ram or more hard drive space. my review here Yükleniyor...

I physically installed it inside the second HDD tray (making sure to ground myself and unplug the power cable). Hard Drive Not Showing Up In Disk Management I want the second drive to be listed in the "computer"(My computer) Report shantanu.torvi- Jan 12, 2009 at 12:51 PM hey thanks a lot for your sharing this inforation....i was struggling Your post just hit me in the right spot.

i changed the primary drive in the bios to the ide hard drive , still couldnt get passed start up mode.

Connecting a hard disk to a SATA 3 port, or buying a hard disk that supports SATA 3 makes no improvement to its performance. I guess that's why it's best to build a desktop from scratch and choose quality components. If this is the case, would I simply be better off mounting it in a new external enclosure? How To Connect Two Hard Disk In One Pc How do i clone the 40gig drive onto the 250gig without formatting the 250gig.

If you have a slim desktop then read on, as there is a chance you will have enough room for a second drive. the c drive that im using now as like no memary some one told me to stick them in my d/cd or my e/dvd/cd drive to keep them out of my I really appeciate it 😀 Reply malcolm says: November 9, 2007 at 6:08 am Hi I've got a system with a 40gig drive which i want to ghost to a 250gig get redirected here But if the priority is wrong in bios maybe?

Even for a non-too compuer literate such as myself! They are not nerds, merely computer literate. You could re-read my post or have someone read it to you. If you are replacing your primary hard drive, make sure you back up any data you want to save before you start.

The new one should have a black rather than a blue bar on the top. I'm guessing it doesn't matter because the cable itself doesn't provide the voltage, it's just a maximum tolerance? I did not install the belwo mentioned system… I have three HD's installed currently two 20GB and a 10 GB. One day when I turned my computer on, it just wouldn't boot with my HDD attached but it boots with my SSD attached alone.

Getting it ready for use takes a little longer. Do you still need to have a jumper on the hard drive or does the microboard in the adapter handle that like the new SATA drives do? There are two cables: the ribbon cable (or SATA cable) and the power cable. Helpful +38 Report Dexter Jul 23, 2010 at 06:11 PM I have noticed a few people saying that they dont want to Format the slave drive so what to do?

My solution, I just made my 2TB internal disk into an external disk, all problems solved. Sorry My immediate thought was that you need to set one disk (Your primary) to the master disk. Some SATA drives also support familiar legacy Molex four-pin power connectors—you can use a Molex or SATA connector. It's there in the device manager too, saying it is working properly but it has no letter allocated to it.

You can change this preference below. It's difficult to cover everyone's needs every time. It did before.